Bosch GBM Professional 10 - Manual (Page 12)

12 | English
2 609 140 656 | (21.7.11) Bosch Power Tools
Product Description and Specifica-
tions
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
While reading the operating instructions, unfold the graphics
page for the machine and leave it open.
Intended Use
The machine is intended for drilling in wood, metal, ceramic
and plastic. Machines with electronic control and right and
left rotation are also suitable for screwdriving and tapping.
Product Features
The numbering of the product features refers to the illustra-
tion of the machine on the graphics page.
1 Keyless chuck
2 Front sleeve
3 Rear sleeve
4 Belt clip
5 Lock-on button for On/Off switch
6 On/Off switch
7 Rotational direction switch (GBM 10 RE)
8 Handle (insulated gripping surface)
9 Screwdriver bit*
10 Universal bit holder*
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.
Technical Data
Noise/Vibration Information
Measured sound values determined according to EN 60745.
Typically the A-weighted noise levels of the product are:
Sound pressure level 83 dB(A); Sound power level 94 dB(A).
Uncertainty K =3 dB.
Wear hearing protection!
Vibration total values a
h
(triax vector sum) and uncertainty K
determined according to EN 60745:
Drilling into metal: a
h
=5.0 m/s 2 , K=1.5 m/s 2 ,
Screwdriving: a
h
=3.0 m/s 2 , K=1.5 m/s 2 .
The vibration emission level given in this information sheet
has been measured in accordance with a standardised test
given in EN 60745 and may be used to compare one tool with
another. It may be used for a preliminary assessment of expo-
sure.
The declared vibration emission level represents the main ap-
plications of the tool. However if the tool is used for different
applications, with different accessories or poorly maintained,
the vibration emission may differ. This may significantly in-
crease the exposure level over the total working period.
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may sig-
nificantly reduce the exposure level over the total working pe-
riod.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and the
accessories, keep the hands warm, organisation of work pat-
terns.
Rotary drill GBM 10
Professional
GBM 10 RE
Professional
Article number 3 601 D73 1.. 3 601 D73 6..
Rated power input W 600 600
Output power W 360 360
No-load speed min -1 2600 0 – 2600
Rated speed min -1 1676 1676
Rated torque Nm 20 20
Spindle collar dia. mm 43 43
Speed control – z
Right/left rotation – z
Max. drilling dia.
– Steel
– Wood
– Aluminium
mm
mm
mm
10
25
10
10
25
10
Chuck clamping range mm 1 – 10 1 – 10
Weight according to EPTA-Procedure 01/2003 kg 1.7 1.7
Protection class /II /II
The values given are valid for a nominal voltage [U] of 230 V. For different voltages and models for specific countries, these values can vary.
Please observe the article number on the type plate of your machine. The trade names of the individual machines may vary.
OBJ_DOKU-27517-001.fm Page 12 Thursday, July 21, 2011 9:15 AM