Audiopipe APCL-30001D es - Manual (Page 4)

- 2 -
English
Bridge in
Bridge out
Low Pass Filter
9
Bass boost Frequency
Alarm Indicator
15
14
13
12
11
10
This RCA jack receives signal from the master amplifier when this amplifier is bridged as
slave. DO NOT use input jacks when the amplifier is working as slave. All the functions
will be adjusted by the master amplifier.
This RCA output sent out bridge signal to another same Class D amplifier in bridging
configuration
Filter out high frequency that the woofer can't play. Adjust this knob to match the woofer's
frequency response.
Subsonic
Filter out unwanted too low frequency. This function will increase the power handing of
your woofer’s. It can adjust the frequency filter from 10Hz (OFF) to 50Hz.
Bass boost Level
Adjust the boosted frequency from 0 ~ 12dB.
Adjust the boosted center frequency. The frequency can be adjusted from 0Hz to 80Hz,use
combine with bass boost level adjusting.
When this LED light up, the amplifier may in self-test mode (when power up) or
malfunction. Shut down the amplifier immediately can find the reason before power up
amplifier again.