Yamaha DVD-S2300 - Manual (Page 11)

7
English
PREP
ARA
TION
PREPARATION
Before you make connections, unplug the power cable for the unit and all other components. Do not plug in the power
cables until all connections are complete.
Use the following commercially-available cables to make connections:
CONNECTIONS
Types of connectors
Connect these
audio output jacks
to the audio input
of an AV amplifier.
Connect these video
output jacks to the
video input of an AV
amplifier or the input of
a video monitor.
This jack is reserved for fac-
tory use. Do not connect any
equipment to this jack. Remote control in/out
jacks
After all connections
are complete, plug the
included power cable
into an AC outlet.
TO AC
OUTLET
Audio cables
Audio pin cable
Coaxial cable
Optical cable
Video pin cable
S Video cable
Component video cable
(for U.S.A. and Australian models)
Video cables
A/V cable
Audio/Video cable
(One cable included in the package)
SCART cable
(for U.K. and European models)
DVD-S2300_UA.book Page 7 Thursday, October 3, 2002 11:03 AM