Chapter review function, After operating the unit, Skip – Yamaha DVD-S2300 User Manual
Page 15: Selecting a track, Search, Pause, Frame advance/reverse
11
English
PLA
YING A DISC
PLAYING A DISC
To clear the memory, press
a
again. The
W
indicator dis-
appears. (When a DVD-Video disc is played, a
chapter
review screen will appear.)
Note
• Opening the disc tray cancels the resume function.
■
Chapter review function
This function plays the first few seconds of each chapter
(from the beginning of the title up to the memorized point)
so you can review previous chapters.
Press
w
while the chapter review message is displayed on
screen. (If you do not press
w
, after a while the message
disappears and playback resumes.)
Notes
• This function may not work on some DVDs.
• Canceling the resume function also clears the chapter review
function.
■
After operating the unit
Press
v
to open the disc tray. Remove the disc, then press
POWER to turn off the unit.
■
Skip
On the remote control, press
y
(or
t
) to skip forward
(or backward).
On the front panel, press
r
/
y
(or
t
/
e
) to skip for-
ward (or backward).
Press
t
on the remote control or
t
/
e
on the front
panel to locate the top of the current chapter or track.
Note
• VCDs that use playback control (page 13) may not allow the
skip operation to function as described above.
■
Selecting a track
Key in the desired track number using the numeric but-
tons.
Example (to select track 27):
1
Press
≥
10.
2
Press 2.
3
Press 7.
1
Press
≥
10 twice.
2
Press 7.
■
Search
On the remote control, press
r
(or
e
) to search for-
ward (or backward).
-or-
On the front panel, press and hold
r
/
y
(or t/e) to
search forward (or backward).
y
• To increase search speed, repeatedly press (or press and hold)
r
or e on the remote control, or press and hold r/y or
t
/e on the front panel.
■
Pause
Press
d
during playback.
To resume playback, press w.
■
Frame advance/reverse
To advance or reverse frames: While the pic-
ture is still or in pause mode, press the cur-
sor buttons (
l
l
l
l
,
h
h
h
h
).
•
To return to normal playback, press w.
•
Press the cursor buttons (l, h) repeatedly, or
press and hold them, to advance or reverse frames
at increasing rates of speed.
•
Pressing d also advances a few frames.
•
On certain DVD-Audio discs, frames may advance
or reverse only during the video portions of the
disc.
Note
• The Video CD format does not permit reverse navigation.
DVD-V
1
7
≥
10
,
VCD
CD
SACD
VCD
CD
SACD
VCD
DVD-A
DVD-V
DVD-S2300_UA.book Page 11 Thursday, October 3, 2002 11:03 AM