Setting up the dss receiver, Storing program data on the smartfile tape, Smartfile function – Sony SLV-M20HF User Manual
Page 56
56
SmartFile Function
Setting up the DSS receiver
You have to set the VCR brand number on the DSS receiver. For example,
select “99” in the VCR CONTROL menu to use a Sony VCR with the
SmartFile function. For details, refer to the instruction manual of your DSS
receiver.
Storing program data on the SmartFile tape
When you record a DSS program using the DSS receiver’s timer, the
program and category name are automatically stored on the SmartFile tape.
Program name
Category name
Notes
• Do not operate the VCR, the DSS receiver, and any other equipment connected to
these units for at least two minutes after timer recording starts. If you operate these
equipment immediately after timer recording starts, the correct program data may
not be sent from the DSS receiver.
• When you use the VCR’s timer for recording, program data from the DSS receiver is
not stored on the SmartFile tape.
Storing program data from the DSS receiver (Program Data
Download) (continued)
8/16/98~8/16/98
p . 1
BLANK TIME
M
0
3
H
1
SP
6
/
8
SP
M
0
3
H
0
START
END
1
Someday
DRAMA