Sony SLV-M20HF - Manual (Page 73)

GUIDE Plus+ System 73
Manual timer setting
will be cut off
GUIDE Plus+ timer
setting
• If a manual timer setting is scheduled to start while the VCR is recording
the GUIDE Plus+ timer setting, the manual timer setting is canceled.
Note
• You cannot change the date, recording start and stop time, or channel of the GUIDE
Plus+ timer setting after the recording schedule has been set. To make a correction,
you need to cancel the GUIDE Plus+ timer setting and reset it from the beginning.
• If the recording stop time of the GUIDE Plus+ timer setting and the
recording start time of the manual timer setting are set at the same time,
the manual timer setting is canceled.
Manual timer setting
will be canceled
GUIDE Plus+ timer
setting
Manual timer setting
will be canceled
GUIDE Plus+ timer
setting
The VCR will be in recording standby
mode about 20 seconds before the
preset recording start time.
will be cut short by
about 2 minutes
• If the manual timer setting and GUIDE Plus+ timer setting are scheduled
to start at the same time, the VCR starts recording the program preset with
the GUIDE Plus+ timer.
• If the GUIDE Plus+ timer setting is scheduled to start while the VCR is
already recording a manual timer setting, the VCR stops recording the
manual timer setting and starts recording the GUIDE Plus+ timer setting.
If the recording stop time of the manual timer setting and the recording
start time of the GUIDE Plus+ timer setting are set at the same time, the
VCR stops recording of the manual timer setting about two minutes before
the preset stop time.