Concord TRANSFORMER XT INSTRUCTION MANUAL User Manual
Page 10
pressed whilst moving the head section (
01
) into the
required position. The CONCORD TRANSFORMER
can be continuously adjusted to the right size and is
locked into the current position when the adjustment
button (
05
) is released.
39
38
The shoulder belt guide (
07
) should be slightly above the top
of the child‘s shoulder. At the same time, the shoulder belt
should pass centrally between the child‘s neck and the outer
edge of the shoulder.
To adjust the CONCORD
TRANSFORMER to the size of
the child, gently press the head
section (
01
) down. Now press the
size adjustment button (
05
) on the
back of the backrest and keep it
_ SECURING THE CHILD WITH THE THREE-POINT BELT
Seat your child well back in the seating area. Pass the
three-point belt across the front of the child to the seat
belt lock, and fasten it in the same way as for an adult.
(There must be an audible click.)
Now position the belts. Pass the lap belt across both
sides and the diagonal belt on the side of the seat belt
lock through the lap belt guide (
03
).
Finally, pass the diagonal belt through the provided
shoulder belt guide (
07
).
Make sure the belt passes
inside the securing hook.