Concord TRANSFORMER XT INSTRUCTION MANUAL - Manual (Page 11)

41 40
_ ADJUSTING THE INCLINATION
The inclination of the CONCORD TRANSFORMER
is continuously adjustable and is locked into the
current position when the seat inclination button
( 04 ) is released.
To use the inclination adjuster on
the CONCORD TRANSFORMER,
press the seat inclination button
( 04 ) on the front edge of the seat.
Keeping the button pressed, move
the seat into the required position.
Pull the belt taut so that the lap belt and diagonal belt are well positioned and ensure
that the belts are not twisted. The lap belt should be in the lowest possible position.
If your vehicle is fitted with a seat belt height adjuster, adjust its height accordingly.
When you wish to release the child from the seat, all you need to do is open the lock
and pass the strap back across the child. To remove the shoulder belt from the guide,
press the shoulder belt locking button ( 06 ) and pull the belt forwards and out.
It is important to ensure that the belts are always correctly positioned each time the seat
is used. If in doubt about any aspect of fitting, check with CONCORD.
The belts must pass through the guides marked in red on the seat. Belts must not be
routed in any other way.