EVS XT2 Version 11.02 - July 2013 Configuration Manual - Manual (Page 146)

Char OUT J1
Description Specifies the monitoring output type generated on the J1
connector.
Value • CVBS
OUT B J3
Description Specifies the output type generated on the J3 connector.
Values • SD
• HD
Default value System dependent
Aspect ratio
Description Defines the frame ratio.
Values • 4:3 L Box
• 4:4 crop
• 16:9
Default value 4:3 L Box
SD Edge Enh.
Description Defines the edge enhancer strength used when generating the
SD downconverted output video.
Values 0 to 100
Default value 66
REC HD->SD Low latency
Description Prevents the downconverted output of the record channels
from being delayed. This parameter is only useful on a Hi-Lo
configuration when the same signal is sent from a HD to a SD
server.
Values Yes (default)/ No
138 3. Multicam Configuration
EVS Broadcast Equipment S.A. Issue 11.02.A July 2013