EVS XT2 Version 11.02 - July 2013 Configuration Manual - Manual (Page 164)

3.8. GPI Tab
3.8.1. Overview
GPI Tab
The GPI tab consists of one page in basic mode (there are no advanced parameters) in the
server-based application. The GPI tab includes the settings of the GPI inputs and outputs
signals.
Setting List
The table below presents the settings of the GPI tab. They specify where the setting
groups are available (page) and whether each setting is available:
• in the server-based and web-based interfaces
• in the Technical Setup menu of the Remote Panel.
Setting Name Basic & Advanced
Technical
Setup
GPI Settings P1 T6.1 to T6.6
TTL GPIs set as GPIs X T6.1
GPIs IN
Channel/Device X T6.2 to T6.3
Port X T6.2 to T6.3
Function X T6.2 to T6.3
Delay X T6.4
GPIs OUT
Function X T6.5
Type X T6.5
Advance X T6.6
Pulse duration X T6.6
Tally Settings P1 T6.7
Tally X X
Add Clip to PL X X
Clips guardbands X X
156 3. Multicam Configuration
EVS Broadcast Equipment S.A. Issue 11.02.A July 2013