EVS XT2 Version 11.02 - July 2013 Configuration Manual - Manual (Page 158)

Channel Settings for Edit Rec
User Interface
The Channel settings allow specifying the settings related to the channel behavior in
stop mode.
The following screenshot presents page 2 in advanced mode of the Protocol tab in the
server-based application and highlights the Channel settings area.
EE
Description Activates the E2E or live mode (the signal being recorded is
played on the output channel).
Values Yes / No
Default Value Yes
Stop Behavior
Description Defines the channel behavior when it is in stop mode.
Values • PB, black screen
• EE
Default Value PB
150 3. Multicam Configuration
EVS Broadcast Equipment S.A. Issue 11.02.A July 2013