EVS XT3 Version 11.02 - July 2013 Configuration Manual - Manual (Page 13)

1.4. Accessing the Web-Based Interface
Prerequisite
When the EVS server is started, you can access the web-based interface of the Multicam
Setup application for that EVS server from any computer that is on the same network
range as the EVS server. You can use any browser to open the web-based interface.
Procedure
To be able to open the web-based interface in a browser, you need to know the IP address
of the PC LAN of the EVS server. See section "Setting the Server LAN PC Address" on
page 25 for more information.
In your browser, enter the following URL: http://xxx.xxx.xxx.xxx/cfgweb/ where the
crosses correspond to the PC LAN IP address of the EVS server you want to access.
CONFIGURATION MANUAL XT3 Server 11.02
1. Introduction 5