EVS XT3 Version 11.02 - July 2013 Configuration Manual - Manual (Page 81)

Example: 2xSLSM 2PH + 2 REC + 2 PLAY MIX (XREC)
The BNC connectors to be used as record and play channels in an SLSM configuration
with 2xSLSM 2PH + 2REC + 2PLAY MIX in XREC mode need to be cabled as shown
below:
Example: 3xSLSM 2PH + 2 PLAY MIX (XREC)
The BNC connectors to be used as record and play channels in an SLSM configuration
with 3xSLSM 2PH + 2 PLAY MIX in XREC mode need to be cabled as shown below:
Available Configurations with 3G SLSM 2-Phase Cameras
The table below shows the available 3G SLSM 2 Phase configurations in HD with an XT3
6U server, and how the BNC connectors should be cabled:
IN6/OUT1 IN5/OUT2 IN4/OUT3 IN3/OUT4 IN2/OUT5 IN1/OUT6
#REC
SLSM
2x
#REC #PLAY
Prim.
Link Sec.
Link Prim.
Link Sec.
Link Prim.
Link Sec.
Link Prim.
Link Sec.
Link Prim.
Link Sec.
Link Prim.
Link
1 0 0 REC 1
1-2 3G
1 1 0 REC
2 REC 1
1-2 3G
1 2 0 REC
3 REC
2 REC 1
1-2 3G
CONFIGURATION MANUAL XT3 Server 11.02
3. Multicam Configuration 73