Cue number on osd, Keyword info, Osd on outputs – EVS XT3 Version 11.02 - July 2013 Configuration Manual User Manual
Page 199: Osd on inputs
The following screenshot presents page 1 of the Network tab in the server-based
application, where the OSD settings are available, and highlights the OSD settings area:
Cue number on OSD
Description
Enables / disables the display of the cue point number on the
OSD of the output monitors when a cue point is recalled inside
a record train.
Values
Yes (default) / No
Keyword info
Description
Shows / hides the defined keywords and ranking on the OSD of
the output monitors when the clip is loaded on its Short IN
point.
As soon as the operator starts jogging into the clip or initiates a
playback, this information is removed from the OSD so that the
video content is clearly visible.
Values
Yes / No (default)
OSD on outputs
Description
Enables / disables the OSD on the play channels.
Values
Yes (default) / No
OSD on inputs
Description
Enables / disables the OSD on the record channels.
Values
Yes (default) / No
CONFIGURATION MANUAL XT3 Server 11.02
3. Multicam Configuration
191