EVS XT2 Version 11.02 - July 2013 Configuration Manual - Manual (Page 123)

Example 2
The allocation of the source audio mono channels shown above means that:
• The embedded audio source of the 1 st mono channel of the record channel (IN1 or
IN2) will be stored on mono channels 1 to 4 of the recorded material.
• The embedded audio source of the 5 th mono channel of the record channel (IN1 or
IN2) will be stored on mono channels 5 to 8 of the recorded material.
Example 3
The allocation of the source audio mono channels shown above means that:
• The audio source from the digital connectors is used for the material recorded on the
EVS server.
• The audio source 1 from the digital connector will be mapped to the 1 st mono channel
of the material recorded on the EVS server, and so on.
Example 4
You will allocate the source audio mono channels as shown above when you want to send
the audio mono channels from REC1 to all other record channels.
The shortcut CTRL+0 allows you doing this more rapidly in the server-based application.
CONFIGURATION MANUAL XT2+ Server 11.02
3. Multicam Configuration 115