EVS XT2 Version 11.02 - July 2013 Configuration Manual - Manual (Page 214)

Grab image
Availability This setting is only available if the license code 117 is valid.
Description Enables / disables an image grab when the MARK key on the
Remote Panel is hit, and when a default XFile has been
assigned.
Each time the MARK key is used, a cue point is marked and a
command is sent to the XFile to save that image.
The grab can also be activated on the keyboard with the
combination CTRL + G.
Values Yes / No
Default value No
Browse button
Description Allows users to convert the function of the BROWSE key.
Values The following values are possible:
• Browse:
This will directly activate the playlist browse function,
which is the default function assigned to this key.
• Sort TC:
The system will perform a Sort TC directly. The system will
not prompt the user with a select menu, and it will use the
current TC on the channel to search with the last selected
criteria.
If the user wants to perform a search with different criteria
(Search Net or Local, StartDate, EndDate, CAM/CLIP,
etc… ), the user should use the normal Sort-TC selection in
the upper menu.
Default value Browse
Default XFile
Description Specifies the XF[2] where clips must be sent to when using the
Archive function from the Remote Panel or VGA screens.
Values XF[2] name and network number
Default value -------- # --
206 3. Multicam Configuration
EVS Broadcast Equipment S.A. Issue 11.02.A July 2013