Recorder settings, Introduction, Loop recording – EVS XS Version 11.01 - November 2012 Configuration Manual User Manual
Page 109
Recorder Settings
Introduction
The Recorder settings allow specifying configuration settings associated to the record
channels.
These fields are available in the following interfaces:
•
in the Multicam Configuration window, Channels tab, in the advanced display mode:
◦
on page 5, 6 or 7 on the server-based application.
◦
on page 1 on the web-based interface.
•
in the Technical menu of the Remote Control Panel (T2.X).
The following screenshot highlights the Recorder settings, defined on page 7 of the
Channels tab in the server-based application:
Loop Recording
Description
Enables/disables the endless loop recording of all record
channels of the EVS server.
Values
Yes (default) / No
The value is forced to 'Yes' in all configurations, except
Spotbox and Server configurations.
99
3. Multicam Configuration
EVS Broadcast Equipment S.A. - November 2012
Issue 11.01.B