EVS XS Version 11.01 - November 2012 Configuration Manual - Manual (Page 99)

3G/Dual
Description Defines the interface the EVS server will use with the 3D or
1080p standards:
• The Dual Link interface consists of a pair of HD-SDI serial
links and provides a bitrate of 2.970 Gbit/s.
• The 3G-SDI interface consists of a single serial link that
provides 2.970 Gbit/s (V3X only).
Values The possible values are:
• ‘No’: available in all cases.
• ‘Dual’ (Dual-Link) available in one of the conditions below:
◦ License code 21 (1080p Dual-Link) active AND
1080p resolution selected (Server tab, Video and
Reference)
◦ License code 23 (3D Dual-Link) active AND
3D setting set to 'Yes'
• ‘3G’ (3G-SDI) available in one of the conditions below (V3X
only):
◦ License code 22 (1080p 3G) active AND
1080p resolution selected (Server tab, Video and
Reference)
◦ License code 24 (3D 3G) active AND
3D setting set to 'Yes'
Default value No
Warning
Only the configurations explicitly allowed by the license codes can be started.
For instance, if a user has code 22 (1080p 3G) and 23 (3D Dual-Link), he cannot
start the server in 3D 3G although he can select 3G and 3D Dual-Link in the
Multicam Configuration window. To enable 3D 3G configurations to be started,
code 24 must be active.
Port Settings
Introduction
The port settings allow assigning the RS422 ports to the various external controllers (EVS
or third-party) that will communicate with the EVS server.
These fields are available in the following interfaces:
• in the Multicam Configuration window, Channels tab, in the advanced display mode
on page 1 on the server- and web-based interfaces.
• in the Technical menu of the Remote Control Panel (T2.X).
89 3. Multicam Configuration
EVS Broadcast Equipment S.A. - November 2012 Issue 11.01.B