EVS IPDirector IPD XEDIO PLUGIN Version 6.0 - January 2013 User Manual - Manual (Page 116)

Issue 6.0.B IPD Xedio Plugin Version 6.0 – User Manual
EVS Broadcast Equipment – January 2013
106
7.5.10 Editing Buttons in the Timeline Area
The timeline buttons allow the users to place and manipulate clips on the timeline. In the
table below you will find a brief description of these buttons but their operation will be
detailed, wherever necessary, in the following sections.
The display of the individual buttons is enabled in Xedio Manager > Softwares >
Parameter Profiles > CleanEdit > Tl buttons.
Button Keyboard
Shortcut
Description
+
or
Undo button: to undo the last action performed
on the timeline.
When the button is available, it is colored.
+
Redo button: to redo the last action which has
been undone on the timeline.
When the button is available, it is colored.
+
Cut button: cuts the selected clip(s) from the
timeline.
+
Copy button: copies the selected clips from the
timeline.
+
Paste button: pastes the cut or copied clips in
the timeline, at the nowline position.
The behavior depends on the Insert/Overwrite
mode.
(toggle between
modes)
Performing edit actions in Insert mode (white
button) will shift the existing elements in the edit
before the selected clip is placed into the edit.
Performing edit actions in Overwrite mode
(colored button) means that the result of the
editing action will replace the content of an
existing edit.
When you delete a portion of the timeline with
the Delete & Clear option active (white button),
the area from which the element is deleted will
remain empty after the deletion.
When you delete a portion of the timeline with
the Delete & Shift option active (colored
button), any element located on the right of the
deleted portion will be shifted to the left, so as to