Insert and overwrite modes – EVS IPDirector IPD XEDIO PLUGIN Version 6.0 - January 2013 User Manual User Manual
Page 124
Issue 6.0.B
IPD Xedio Plugin Version 6.0 – User Manual
EVS Broadcast Equipment – January 2013
114
Insert and Overwrite Modes
Before you drag a clip onto the timeline, you need to define the way you want to insert it.
Two modes are available: Overwrite or Insert.
You select the mode and toggle between both modes by:
•
clicking the Overwrite/Insert Mode button
•
pressing the
keyboard key.
Mode
Description
Overwrite
(default)
(white)
adds the media in the timeline, overwriting the existing
media from the selected position. In other words, the
media in the timeline will be removed from the insertion
point by the duration of the added media.
Insert
(colored)
adds the media in the timeline without overwriting
existing media and pushes further right the existing
elements of the timeline placed after this position.
In this mode, you can only insert the media on the clip
boundaries which are common to all selected tracks. The
blank areas are not taken into account. The possible
insertion point is shown with a red arrow on the top of the
timeline: