Hafele EN 237.56.004 - Manual (Page 4)

4
1. Pins of the Drill Jig
2. Place the EFL1 lock at the cabinet inside of the corresponding piece of furniture using
the drill jig.
• With overlay doors: adjust the drill jig so that it is flush with and parallel to the front
edge of the cabinet.
• With inset doors: position the EFL1 lock to the inside by the dimension of the door
thickness. Put the drill jig in such a manner that it is positioned parallel to the cabinet
edge.
• Doors with stoppers: in addition position the EFL1 lock to the outside by the
thickness dimension of the stoppers.
3. Use the marker or pencil to mark the screw holes.
4. Use 2 #6 wood screws (ø 3.5mm) to secure the EFL1 lock to the furniture cabinet.
For adjustment, leave the drill jig in position on the cabinet panel.
5. Push the door against the placed drill jig. The screw holes for the installation of the
fixing plate of the locking bolt are marked by the drill jig.