Hafele EN 237.56.004 - Manual (Page 5)

5
6. Put the locking bolt through the fixing plate and screw it to the door with 2 Hospa screws.
7. Run the power cable on the inside of the furniture.
8. Plug the 2 pins into the AMP plug housing until the pins engage. Now press the 2
outer jacket sleeves of the AMP plug together.
9. Connect the AMP connector of the EFL1 lock to the power supply and check for
functioning. Door must open and close without any problems.
10. Plug the AMP plug into the output extender or into the mounting block (shown later).