Manhattan 177603 2D Barcode Scanner - Manual - Manual (Page 14)

6 prograMMing coDeS
6.1 factory DefaULt
The default RS232 settings are 57600 Baud, 8 Data Bits and No Parity. Factory
default settings are indicated in bold inside brackets: <Example>
6.1.1 Setting Scanner paraMeterS to factory DefaULtS
This resets all configuration parameters to their original factory default
settings. After this reset, you need to select all required parameters that meet
the application requirements.
6.2 rS232 paraMeterS
6.2.1 BaUD rate
14
PROGRAMMING CODES
75
Set Factory Default
150
300
600