Soft dB Opus Suite SLM 4-Ch Module - Manual (Page 32)

29
7.3 Data Selection
The Edit button of the Data Selection allows selecting the data to display on each graph.
Display Element
Click / to enable or disable the element. Each display
zone can display up to four elements.
Input Selection
Select the Input Channel from which the data will be acquired. Only
enabled inputs will be accessible (see section 6.1, p.18)
Parameters
Select the Parameter for each element. The selection may be restricted
depending on the graph type (see section 7.2).
Frequency Weighting
Select the desired Frequency Weighting (A, C or Z)
Inst./Min/Max
The user can choose to display the Maximum or Minimum value of the
Averaging Period or the current value. The selection may be restricted
depending on the graph type (see section 7.2).
Average Period
When the selected elements depend on the averaging period, the
reference period has to be selected.
Avg Time: The value resets at each new leq period
DataSet: The value resets at each new DataSet.