Soft dB Opus Suite SLM 4-Ch Module - Manual (Page 40)

37
8.2 Dataset ID
DataSet ID
The ID Format allows the user to choose the name format of
dataset files to be recorded.
• Four-digit increment of the DataSet in the Record
Directory
• DataSet start time in format YYYYMMDD_hhmmss
• DataSet start time in format MMDD_hhmmss
• DataSet start time in format DD_hhmmss
The ID increment allows the user to choose when to switch to a
new measurement file. This control is enabled only when
AutoStore is in Multiple Mode (see section 8.3, p. 39).
• All the data in a single file (unless maximum size is
reached)
• New file after a specified quantity of ‘X’ Leq average
periods
• New file once an hour (according to the specified
alignment)
• New file once a day (according to the specified alignment)
• New file once a week (according to the specified
alignment)
Upon selection of the Every ‘X’ Leq, a control will appear below to
select the appropriate quantity of Leq. Similarly, a time alignment
control will appear upon selection of Every Hour/Day/Week.
The Align Leq Period on Clock Time control allows the user to
force the Alignment of the Leq Period to match the time on the
clock.
This control is only visible with ID increment set to On Start Only
or Every ‘X’ Leq. The alignment with clock is always forced when
Every Hour/Day/Week modes are selected.