Soft dB Opus Suite Building Vib Module - Manual (Page 15)

6 Main interface controls and indicators
6.1 Measure Controls
RUN
When the user clicks this button, the measurement process is launched.
STOP/SAVE
When the user clicks this button, the measurement stops. The STOP button then
becomes the SAVE button.
When the user clicks this button, the active measurement is saved. The SAVE button is
then disabled until another measurement is complete.
6.2 File Info
File Save
This indicator displays the current measurement file.
Theses two buttons are used to open the next and previous files (respectively) in the
measurement save directory.
This indicator displays the next file to be saved.
Event Recording
This indicator light on when an event is being recorded.
Waveform Type
This control allows the user to display the live signal or the event waveform on the
waveform graphs. When the measurement is stopped, only event waveforms can be
displayed as there is only a live signal when the measurement is running.
Opus Building Vib User Guide – V1.1b 11