Soft dB Opus Suite Building Vib Module - Manual (Page 5)

Opus Building Vib User Guide – V1.1b 1
1 Introduction
Congratulations on your purchase of the Opus Suite Building Vib Module.
The Opus Software Suite is a Sound and Vibration software with six measurement modules:
 SLM 4ch module : 4 channels, Class 1 conform to IEC 60651, IEC 60804, IEC 61672‐1
 SLM & 3Vib module :
1 SLM channel (same as SLM 4ch module) and 3 vibration channels
conform to ISO 2631‐1
 Data Logger module
 RT‐60 module
 Building Vib module
 Intensity module
The Opus Suite is intended to run on a Concerto. The software can also be installed on a computer if
an Alto‐6ch or an I‐Track unit is connected. Moreover, some post‐processing functions are available
on a PC even if no compatible unit is detected.
The current user’s manual describes the Building Vib Module.
General Specifications – Building Vib Module
Records
 Event recording on triggered vibration value
 Vibration time signals recording
 Acoustic time signal and SPL Time History recording
 User defined event recording length
 Continuous monitoring
Vibration
 3 channels (X, Y and Z) – (triaxial accelerometer)
 240 Hz Bandwidth
 Acceleration, Velocity and Displacement
 USBM RI 8507 and DIN 4150
Acoustic
 1 channel
 Slow, Fast and Impulse SPL global levels
 A, C and Z SPL frequency weighting
 50 ms to 0.5 s SPL sampling rate
 Wave recordings for monitoring