Soft dB Opus Suite Building Vib Module - Manual (Page 31)

Power Reset
If the Concerto happens to crash and it is not possible to take back the control, a power reset might
be necessary. To complete the power reset, the three buttons on the front of the Concerto must be
used.
Here is the procedure:
 Step 1 : Press and hold the Enter button(the middle button)
 Step 2 : Press and hold the Function button (the leftmost button)
 Step 3 : Press and hold the Up arrow button (of the rightmost button)
Keep holding the 3 buttons a few seconds (about 5 seconds) untill the Concerto restarts. Start again
the procedure as necessary until it actually reset. When pressing the Up arrow, be careful not to
press the left or right arrow as well (be gentle with the button).
Step 3
Step 1
Step 2
Opus Building Vib User Guide – V1.1 27