Spicer 10 Series Driveshafts - Manual (Page 21)

Tube Type Assembly
Standard Parts
Standard Tube Size 3.5" x 0.083" (88.90mm x 2.11mm)
Tube Part Number 28-30-62
Series 1480
21
10 Series
© 2005 Dana Corporation
Minimum Length Slip Joint End Tight Joint End Assembly
Collapsed Part Number
FF-FF CL-CL Flange Yoke U-Joint Slip Yoke Tube Shaft Tube Yoke U-Joint Flange Yoke
Flange Face Centerline or S.S. Kit Assembly Kit or S.S.
to to (Shipping (Includes (Shipping
Flange Face Centerline Strap) (Dust Cap Kit) Strap)
J = 1.562" - (39.6mm) - 16 Spline S = 4.500" - (114.3mm)
Tubing Formula: T = CL-CL (Collapsed) minus 13.060" - (331.7mm)
14.44” S.S. 5-482X 3-3-1641KX 3-40-1871 3-28-547 5-482X S.S 909741
(366.7 mm )
J = 2.250" - (57.1mm) - 10 Spline S = .937" - (23.8mm)
Tubing Formula: T = FF-FF (Collapsed) minus 7.470" - (189.7mm)
8.50” 7.00” 3-2-489 5-482X 3-3-1621KX 3-40-731 3-28-497 5-482X S.S. 914673 (1)
(215.9 mm ) (177.8 mm )
(1) Non-Standard tube size 3.0" x 0.095" (76.2 mm x 2.41 mm) Part #24-30-12