Spicer 10 Series Driveshafts - Manual (Page 9)

Tube Type Assembly
Standard Tube Size 3.0" x 0.083 (76.2mm x 2.11mm)
Tube Part Number 24-30-42
Series 1350
9
10 Series
© 2005 Dana Corporation
Minimum Length Slip Joint End Tight Joint End Assembly
Collapsed Part Number
FF-FF CL-CL Flange Yoke U-Joint Slip Yoke Tube Shaft Tube Yoke U-Joint Flange Yoke
Flange Face Centerline or S.S. Kit Assembly Kit or S.S.
to to (Shipping (Includes (Shipping
Flange Face Centerline Strap) Dust Cap Kit) Strap)
J = 1.500" - (38.1mm) - 16 Spline S = 2.000" - (50.8mm)
Tubing Formula: T = CL-CL (Collapsed) minus 8.750" - (222.2mm)
10.12" S.S 5-178X 3-3-598KX 3-40-1471 3-28-47 5-178X S.S. 910598 (1)
(257.0 mm )
J = 1.500" - (38.1mm) - 16 Spline S = 3.624" - (92.0mm)
Tubing Formula: T = CL-CL (Collapsed) minus 13.590" - (345.1mm) Minimum T = 1.470" - (37.3mm)
15.12" 12.00" 3-2-119 5-480X 3-3-488KX 3-40-1611 3-28-57 5-480X 3-2-119 909048
(384.0 mm ) (304.8 mm )
(1) Non-Standard tube size 2.5" x 0.083" (63.5 mm x 2.11 mm) Part #20-30-22