Spicer 10 Series Driveshafts - Manual (Page 61)

Series SPL140 Tube Type Assembly
Standard Parts
Standard Tube Size 4.4" x 0.14" (111.7mm x 3.5mm)
Tube Part Number 100-30-3
4
Minimun Length Tight Joint End Center Bearing End Assembly
Collapsed Part Number
FF-FF C L
- C L
Flange Yoke U-Joint Slip Yoke Tube Shaft Tube Yoke U-Joint Flange Yoke
Flange Face Centerline or S.S. Kit Assembly Kit or S.S.
to to (Shipping (Includes (Shipping
Flange Face Centerline Strap) Dust Cap Kit) Strap)
J = 3.07" - (78mm) - 30 Spline S= 4.33" - (110mm)
Tubing Formula: T = A-2 (Collapsed) minus 14.370” - (365.0mm) Minimum T = 2.678" - (68.0mm)
16.92" S.S. SPL140X 140-82-21X 140-55-21X 140-28-17 SPL140X S.S. 140DS55007
(429.8 mm )
16.92" S.S. SPL140X 140-82-21X 140-55-21X 140-28-17 SPL140X S.S. 140DS55001(1)
(429.8 mm )
(1) Non-Standard tube size 4.3" x 0.20" (110 mm x 5 mm) Part #100-30-5
ß C L
- C L
J
S
SPL Series
© 2005 Dana Corporation