Spicer Single Drive Axles Service Manual: S140 Series - Manual (Page 23)

20
Wheel Differential Assembly
Wheel Differential
Assembl
y
6. Remove the half shafts first and then remove their
side pinions and thrust washers.
7. Remove the full shaft, side pinions and thrust wash-
ers.
8. Remove inner side gear and thrust washer.
9. Remove bearing cones from ring gear and differen-
tial case in two steps:
A. Mount puller vertically to split bearing. This action
will start moving the bearing off case and gear.
B. Mount puller horizontally to remove cone.
Half
Differential
Shaft