Spicer Power Divider Unit (PDU) Cover to Carrier Leak - Manual (Page 2)

PHOTO SUBMISSION PROCESS: USING THE INTERNET
To summit a photo on-line as part of the claim process for leaks, a Digital Camera*, PC and Internet Access is
required. Follow the steps listed below to complete this process.
*A “digital camera” is preferred; a 35mm photo can be scanned to a PC file.
Taking a Photo:
1. Using a digital or 35mm camera take a single picture of the leaking power divider cover before the repair work is
started.
a. Pictures should be taken from approximately 3 feet. This works best.
b. The picture must be clear, in focus and bright enough to show the extent of the leak
Downloading the Photo to a PC:
Download the digital or scanned picture to a file on a PC. 2.
a. The picture should not exceed 800 pixels wide at 72 dpi.
b. The picture must be in .JPG format.
c. Submit the picture to the CVSD Warranty Submission website:
http:\\www.DanaCVSDWarranty.com
Reminder:
Warranty Claim will not be processed until a picture is received
.
Also Note: If picture received has previously been submitted for a repair on a different chassis the current claim
will be denied.
This bulletin contains product information.
Dana Corporation is not committed or liable for canvassing existing product.
2