Spicer Power Divider Unit (PDU) Cover to Carrier Leak - Manual (Page 4)

6.
Photo Submission Page:
Fill in the following vehicle information from your claim to the Submission Page.
a. Record the vehicle “Date in Service” using the pull down buttons.
b. Record the “Failed Date” using the pull down buttons.
c. Type in the last 6 digits of the chassis VIN.
d. Type in the actual vehicle mileage at the time of the failure. If mileage is in “Kilometers” use pull down
button to indicate this.
Enter last 6 digits of vehicle chassis
VIN here.
Use pull down buttons to enter
“Date in Service” and “Failed Date”.
7. You must now attach the picture from your PC to the web page.
a. The web page allows you to attach a photo for either carrier or both if necessary.
b. Select the correct “Browse…” button for the axle you are about to repair.
c. Double click on the photo file you saved to the PC to attach the file to the web page.
d. Select the “Submit Photo(s)” button when finished.
If mileage is in “kilometers” be sure
to change indicator from “M” to
“Km” using the pull down button.
Attach the photo file using the
BROWSE button. Photo must be in
a “JPG” format.
An “error” message will show if one or more of the required information fields
are missing data. If this happens you must re-enter all of the information
again and re-submit the claim.
e. An acknowledgement that the claim has been received will appear on the screen. This completes the
photo submission process.
f. Logout of the system when finished.
This bulletin contains product information.
Dana Corporation is not committed or liable for canvassing existing product.
4