Spicer Dana Spicer - King Pin Kits and Tie Rod Ends - Manual (Page 23)

21
Spicer ® King Pin Kits & Tie Rod Ends
HX700-8-2013
For Technical Information reference Dana Spicer Steer Axle
Service Manual AXSM-0038
TORQUE LBs Ft. (Nm) SOCKET SIZE DESCRIPTION FASTENER
Nut, Draw Key (Single)
Nut, Draw Key (Dual)
Stop Screw
Jam Nut, Stop Screw
Nut, Slotted
Bolt, Tie Rod Clamp
Cap, Knuckle
Nut, Outer Spindle
Nut, Inner Spindle
Nut, Pro-Torque Spindle
1/2-20-UNF-2B
3/8-16-UNC-2A
5/8-18-UNF-2A
5/8-18-UNF-3B
7/8-14-UNF-2B
5/8-11-UNC-2A *
2.375-16-UNF-2A
1.5-18-UNEF-2B
1.5-18-UNEF-2B
1.5-18-UNEF-2B
30-45 (41-61)
24-36 (33-49)
-
90-120 (122-163)
120-160 (163-217)
45-60 (61-81)**
50-75 (68-102)
100-150 (135-203)
see wheel bearing adjustment
see wheel bearing adjustment
3/4" 6 point
9/16" 6 point
5/8" open end wrench
15/16" open end wrench
15/16" 6 point
15/16" 6 point
15/16" 6 point
2 1/4" 6 point
2 5/8" 6 point
2 1/2" 6 point
TORQUE LBs Ft. (Nm) NOTATION DESCRIPTION FASTENER
Knuckle Capscrew
Steering and Ackermann
Arm Nuts - 12F, 13F Axle
Steering and Ackermann
Arm Nuts - 18F, 20F, 22T,
24T Axle
Wheel Bearing Adjustment
Tie Rod End Nut
Steering Arm Ball Stud Nut
Draw Key Nut
Cross Tube Clamp Screw Nut
22-28 (30-38)
350-490* (47S-664)
-
775-1050* (1051-1424)
-
-
see wheel bearing adjustment
165-230" (224-312)
165-230" (224-312)
30-45 (41-61)
90-120 (122-163)
NOTE: Torque nut to the range
minimum, then tighten further to
align cotter pin hole. Check torque
to make sure it does not exceed
range maximum. If it does, use a
new nut.
-
-
-
-
-
-
-
-
-
-
-
* Spicer ® King Pin Kits that contain Garlock composite DX and DX10 bushings are presized and do not require reaming. Please see the inside
front cover for details and pictures.