Spicer Dana Spicer - King Pin Kits and Tie Rod Ends - Manual (Page 24)

Spicer ® King Pin Kits & Tie Rod Ends
22
HX700-8-2013
Publication Number Publication Description / Name
AXIP-0074
AXIP-0075
AXIP-0090
AXSM-0038
AXWP-0403
WESM-0060
Spicer ® Steer Axles - Spicer ® EFA Family
Spicer ® Steer Axles - E Series
Spicer ® Steer Axles - D & I Family
Spicer ® Steer Axles Service Manual
Spicer ® Tie Rod Inspection Procedure
Spicer ® Steer and Drive Wheel Ends
Visit www.spicerparts.com to
download these publications
For Technical Information reference Dana Spicer Steer Axle
Service Manual AXSM-0038
TORQUE LBs Ft. (Nm) DESCRIPTION FASTENER
Tie Rod End Nut - (Note 1)
Tie Rod Clamp Bolt (Note 3)
Steering Arm Nut & Tie Rod
Arm Nut (Note 1)
Kingpin Draw Key Nut (Note 2)
Kingpin Cap Bolts
120-160 (160-218)
45-60 (61-81 )
450-650 (610-881)
775-1200 (1050-1625)
25-31 (34-42)
17-25 (23-34)
-
-
-
-
-
-
NOTATION
NOTE 1: Cotter pin cannot be installed
after minimum torque is attained. The
nut must be advanced until the cotter
pin can be installed. Torque specifi ed
is for taper and threads which are clean
and oil free.
NOTE 2: Torque to specifi cations. Tap
unthreaded end of draw key sharply
with a hammer, and re-torque draw key
nut to specifi cations.
NOTE 3: Drop tie rod ends: I-120SG
and I-140SG = 55-70 lbs. ft. (75-95 Nm).
I-200SG, I-200W, & I-220W = 150 - 180
lbs. ft. (203-244 Nm).
TORQUE LBs Ft. (Nm) DESCRIPTION FASTENER NOTATION
Tie Rod End Nut (Note 1)
Tie Rod Clamp Bolt
Steering Arm Nut & Tie Rod
Arm Nut
Kingpin Draw Key Nut
Kingpin Cap Bolts
-
-
-
-
-
-
120-160 (160-218)
Straight: 45-60 (61-81)
Drop: 150-180 (203-244)
775-1200 (1050-1625)
24-36 (32.5-49)
65-80 (88-108)
-
-
-
-
-
-
* Spicer ® King Pin Kits that contain Garlock composite DX and DX10 bushings are presized and do not require reaming. Please see the inside
front cover for details and pictures.