Spicer TIMS (Tire Inflation and Monitor System) for Trailers Installation Guide - Manual (Page 16)

13
Installation
Spindle Plug, Plug Driver, and Rubber Collar Identification Chart
Model
Spindle
Identification* Spindle
Plug Plug
Driver** Rubber
Collar
D22 (Tapered) 1.750" 676397 676461 676364
P22 (Parallel) 2.500" 676385 676462 676347
P22 (Parallel) 2.753" 676447 676463 676448
*NOTE: A minimum bore depth of 1.0" required.
**NOTE: Use standard drive handle (ex: Kent Moore J-8092) with appropriate plug driver.