Spicer TIMS (Tire Inflation and Monitor System) for Trailers Installation Guide - Manual (Page 20)

17
Installation
Controller Assembly Installation
1. Locate the controller assembly such that it can con-
veniently connect to the brake supply tank.
2. Drill two holes on 4" centers to accommodate the
mounting bracket. Attach the controller assembly
with two 5/16" fasteners. See illustration below.
CAUTION: The controller assembly must be mounted
vertically with ECU connector down to prevent damage.
See illustration below.
CAUTION: Do not weld on bracket without first remov-
ing both ECU & Manifold from the bracket.
CAUTION: Cover Controller Assembly prior to painting
or undercoating trailer to prevent plugging of manifold
and ECU vents.
218UX028
Cross
Member
5/16"
Mounting
Bolts