Remove pinion assembly – Spicer Single Drive Axles Service Manual: Single Reduction & Single Reduction with Differential Lock User Manual
Page 17
Advertising
14
Pinion Assembly
General Information
Remove Pinion Assembly
Procedure -
1.
Remove pinion bearing cage cap screws. Remove
pinion and cage assembly from carrier. Remove
shim pack.
Do not allow pinion to drop on hard surface
If gear set is to be reused, keep pinion bearing cage shim
pack intact for use in reassembly. If the original shims can-
not be reused, record the number and size of shims in the
pack.
WARNING
Advertising