Veris Technologies Quad 1000 Soil EC Mapping System - Operating Instructions - Manual (Page 10)

OM17-Quad1000
3-1
Section 3
Implement Overview and Set-up
Figure 1.
The tongue must be installed prior to use. To do so, please take precautions to ensure that the
framework is properly supported to ensure safety.
1) Remove bands that attach tongue and framework to shipping pallet.
2) Install tongue as shown in Figure 2.
Figure 2a. and 2b
Signal Cable quick-
connect coupler port
Weights
Disk
electrodes
Tongue
Implement
hitch
Tire and Wheel
Assembly
Raise/lower crank
Install tongue with ½” X
3.25” bolts, lock washers
and nuts.