Veris Technologies Quad 1000 Soil EC Mapping System - Operating Instructions - Manual (Page 12)

OM17-Quad1000
3-3
Install weight bracket if included as shown in Figure 7. A choice of assembly positions is available
to accommodate customer-provided suitcase weights. Properly installed weights will provide
positive tongue weight, but still allow user to lift tongue without straining. If tongue weight is
excessive, move bracket to middle or rear holes; if tongue we
ight is negative (tongue won’t stay
down) move weight bracket forward. For Veris supplied weights, install bracket in the second hole
from the front.
Figure 7
To attach John Deere style suitcase weights, install weight bracket in the front holes using ½” x
1.25” bolts with Nylock nuts. Bolt the John Deere adaptor bracket to weight bracket bar using ½” x
1.5” bolts with lock washer and nut (Figure 8). Clamp weights together using ½” x 3.5” bolts, USS
flat washers, and lock washer and nut (Figure 9).
Figure 8 Figure 9
Install weight bracket
bar with ½” x 1.25”
bolts and Nylock nuts.