VTech DS6672-4 Abridged manual - Manual (Page 5)


To attach the earbud to the headset earpiece:
Choose an appropriate earbud.
Press the earbud towards the earpiece until it clicks into place. Move the earbud
around so that the protruding bump on the earbud is pointing towards your
mouth when placed on your ear. The protruding bump on the earbud holds the
headset securely in your ear.
.
.
Headset attachments
Earbud
To remove the earbud from the headset earpiece:
Hold both sides of the earbud and then pull the earbud until it separates from
the earpiece.
. Hold the headset with one hand.
Lift the ear hook upward.
. Twist the ear hook 80 o clockwise.
3. Push the ear hook downward. 4. Hook the headset on your left ear.
Adjust the angle of the headset until the
microphone is pointing towards
your mouth.
Ear hook
To attach the ear hook to the headset:
Remove any headset attachment (earbud excluded) connected to the headset.
Insert the ear hook [A] into the rotating clip [B] on the headset until it clicks
into place.
Hook the headset on your right ear. Adjust the angle of the headset until the
microphone is pointing towards your mouth. Firmly grip the earpiece with one
hand whenever adjusting the headset microphone up or down.
.
.
3.
To adjust the headset to wear on your left ear:
Protruding bump
[A]
[B]