VEGA VEGASWING 83A - Manual (Page 25)

VEGASWING 81A and 83A 25
Fault monitoring
VEGASWING’s oscillator continuously moni-
tors the instrument for the following faults:
- tuning fork corrosion or damage
- absence of vibration
- line break for vibration actuation
- vibrating frequency too low
- corrosive medium penetrating the sensor
from the vessel side.
More functions can be monitored. The correct
functioning of the complete measurement
chain canbe monitored at the touch of a but-
ton when the SWING E82 Z oscillator is used
in conjunction with an appropriate signal
conditioning instrument.
Set-up