VEGA VEGASWING 83A - Manual (Page 7)

VEGASWING 81A and 83A 7
Product description
1.3 Technical data
VEGASWING 81A and 83A
Housing
Housing material plastic PBT (Polyester) or
aluminium (plastic-coated)
Protection
- plastic housing
IP 66
- aluminium housing IP 66 and IP 67 (meets both categories)
Cable entry 1 M20x1,5 unit
(SWING E82 R: 2 M20x1,5 units)
Terminals max. 1 x 1,5 mm 2 cable cross-section
Mechanical connection
Thread G 1 A or 1“ NPT
- material 1.4571 (stst) or Hastelloy C4
Flanges DIN and ANSI from DN 32
- material 1.4571, 1.4571 plated with Hastelloy C4
DN 50 PN 40 enamelled steel
or 1.4571 ECTFE-coated
Hygienic fittings
Material
1.4571
- cone DN 25
- bolting DN 40, DN 50
- Tri-Clamp 1 1 /
2
“, 2“
- Tuchenhagen Varivent DN 50 PN 10
- hyg. connection with compression nut F40 PN 25, 14571, 14581
- hyg. connection with tension flange DN 32 PN 25, 1.4571, 1.4581
Tuning fork
Material 1.4581, Hastelloy C4, Hastelloy C4 enamelled
1.4581 with ECTFE coating
Extension tube (VEGASWING 83 A)
Material 1.4571, Hastelloy C4, Hastelloy C4 enamelled
1.4571 with ECTFE coating
Length
- 1.4571, Hastelloy C4
140 mm … 4000 mm
- Hastelloy C4 enamelled 140 mm … 1200 mm
- 1.4571, ECTFE (Halar) 140 mm … 1600 mm
Weight
Plastic housing approx. 1,5 kg
Tube extension (VEGASWING 83A) approx. 0,11 kg/m