4 connection, 1 connection to pc/modem – VEGA VEGACONNECT 3 User Manual
Page 10
4 Connection
4.1 Connection to PC/Modem
For connection of VEGACONNECT 3 to a PC or a modem, an
RS
232 interface is absolutely necessary. If your PC has no
RS
232 interface, you can use an USB-RS232 adapter (order
number 2.26900). The voltage supply of VEGACONNECT 3 is
carried out via the control cables of the RS232 interface. If
these do not deliver suffiencient power, an additional power
supply unit can be used (see chapter "Configuration - Power
supply").
VEGACONNECT
3 can be connected with the 9-pole Sub-D
plug directly to the RS232 interface of any PC.
5
4
3
2
1
9
8
7
6
3
2
1
4
5
Fig. 2: Electrical connection
1
RS232 connection (9-pole Sub-D socket)
2
to PC/Modem
3
to the sensor (I²C-Bus plug series 50)
4
to the 4 … 20 mA signal cable
5
to the sensor (I²C-Bus plug plics
®
series)
If VEGACONNECT 3 should be connected with the RS232
interface of an external modem, a special modem connection
cable must be used in addition. The cable is available from
VEGA under the order number "MODEM.KX". Alternatively,
Connection to the PC
Connection to a modem
10
VEGACONNECT
3
Connection
25641
-EN
-070726