VEGA VEGACONNECT 3 - Manual (Page 8)

range of 6 … 12 V DC is not necessary. The power supply unit
is connected with a low voltage micro plug (outer ø 3.5 mm,
inner ø 1.3 mm) to VEGACONNECT 3. The polarity is
unimportant.
You can find detailed specifications on voltage supply in
chapter "Technical data" in the "Supplement".
3.3 Operation
The adjustment is carried out via a Windows PC with a
parameter adjustment software such as PACTware™ with
VEGA DTM or VVO. There are no adjustment elements on the
instrument itself.
3.4 Packaging, transport and storage
Your instrument was protected by packaging during transport.
Its capacity to handle normal loads during transport is assured
by a test according to DIN EN 24180.
The packaging of standard instruments consists of environ-
ment-friendly, recyclable cardboard. For special versions, PE
foam or PE foil is also used. Dispose of the packaging material
via specialised recycling companies.
Transport must be carried out under consideration of the notes
on the transport packaging. Nonobservance of these instruc-
tions can cause damage to the device.
The delivery must be checked for completeness and possible
transit damage immediately at receipt. Ascertained transit
damage or concealed defects must be appropriately dealt
with.
Up to the time of installation, the packages must be left closed
and stored according to the orientation and storage markings
on the outside.
Unless otherwise indicated, the packages must be stored only
under the following conditions:
l
Not in the open
l
Dry and dust free
l
Not exposed to corrosive media
l
Protected against solar radiation
l
Avoiding mechanical shock and vibration
Packaging
Transport
Transport inspection
Storage
8 VEGACONNECT 3
Product description
25641
-EN
-070726