VEGA VEGACONNECT 3 - Manual (Page 5)

During the entire duration of use, the user is obliged to
determine the compliance of the required occupational safety
measures with the current valid rules and regulations and also
take note of new regulations.
2.5 Safety approval markings and safety tips
The safety approval markings and safety tips on the device
must be observed.
2.6 CE conformity
The protection goals of the EMC Directive 2004/108/EC (EMC)
and the Low Voltage Directive 2006/95/EC (LVD) are fulfilled.
Conformity has been judged according to the following
standards:
EMC: EN 61326: 1997
(electrical instruments for control technology and laboratory
use - EMC requirements)
l
Emission: Class A
l
Susceptibility: Industrial areas
LVD: EN 61010-1: 1993
(safety regulations for electrical measurement, control and
laboratory instruments - part 1: Gerneral requirements)
2.7 Safety instructions for Ex areas
Please note the Ex-specific safety information for installation
and operation in Ex areas. These safety instructions are part of
the operating instructions manual and come with the Ex-
approved instruments.
2.8 Environmental instructions
Protection of the environment is one of our most important
duties. That is why we have introduced an environment
management system with the goal of continuously improving
company environmental protection. The environment man-
agement system is certified according to DIN EN ISO 14001.
Please help us fulfil this obligation by observing the environ-
mental instructions in this manual:
l
Chapter "Packaging, transport and storage"
l
Chapter "Disposal"
VEGACONNECT 3 5
For your safety
25641
-
EN
-070726