VEGA VEGASTAB 692 MD User Manual
Page 13
VEGASTAB 692 MD
13
Setup
After having assigned an address to all sen-
sors, connect all sensors to VEGASTAB 692
MD and start via Services - Connection
Services - Connection
Services - Connection
Services - Connection
Services - Connection or F8
F8
F8
F8
F8
a further call setup. Proceed as previously
described in Configuration - Measuring
Configuration - Measuring
Configuration - Measuring
Configuration - Measuring
Configuration - Measuring
system
system
system
system
system and check by means of the list box if
VVO has found all sensors. The first number
in the list box is the assigned multidrop ad-
dress, the second is the serial number of the
corresponding sensor.
Now you can set up (adjustment, parameter
setting) each measurement loop with VVO as
described in the respective operating in-
structions manual of the sensor. Then, the
measured values can be read out with the
visualisation software VISUAL VEGA.