VEGA VEGABAR 41 Profibus PA - Manual (Page 7)

VEGABAR 41 (Profibus PA) 7
Product description
Electrical data
Adjustment ranges
Zero adjustable from -20 … +95 % of nominal range
Span adjustable from 3.3 … 120 % of nominal range
Supply and signal circuit
Supply voltage 9 … 32 V DC
(delivered by the segment coupler)
Current consumption 10 mA ± 1 mA
Integration time 0 … 50 s
Rise time 85 ms (ti = 0 sec; 0 – 63 %)
Display and adjustment circuit
For connection to VEGADIS 10 and/or display module
Data transmission digital
Connection line 4-wire (standard line)
Max. line length 25 m
Connection
Cable entry M20 x 1.5 (for cable-ø 5 … 10 mm)
Screw terminals for conductor cross-sections of up to 2.5 mm 2
Recommended bus cable types - SINEC 6XV 830-5AH10 (Siemens AG)
- SINEC L2 6XV1 830-35H10 (Siemens AG)
- 3079 A (Belden)
Protective measures
Protection 1) IP 65
Protection class III
Overvoltage category III
1) Use of a suitable seal for the cable in the PG is necessary for maintaining the housing protection. If the seal
used does not fit the cable, it should be replaced by a suitable one.