VEGA VEGABAR 61 Profibus PA - Manual (Page 42)

Copy sensor data?
Basic adjustment
If the "Reset" is carried out, the sensor resets the values of the
following menu items to the reset values (see chart):
8)
Menu section Function Reset value
Basic settings Unit of measurement bar
Temperature unit °C
Zero/Min. adjustment Measuring range begin
Span/Max. adjustment Measuring range end
Density 1 kg/l
Density unit kg/l
Damping 0 s
Linearisation linear
Sensor-TAG Sensor
Display Displayed value PA-Out
Service Additional PA value Secondary Value 1
Out-Scale-Unit Volume/l
Scaling 0.00 to 100.0
Decimal point indication 8888.8
The values of the following menu items are not reset with "Reset:
Menu section Function Reset value
Basic settings Position correction no reset
Display Lighting no reset
Service Language no reset
Application no reset
Factory setting
Like basic adjustment, furthermore special parameters are reset to
default values.
9)
Pointer
The min. and max. distance values are reset to the actual value.
Additional adjustment and diagnosis options such as e.g. scaling,
simulation or trend curve presentation are shown in the following menu
schematic. You will find a detailed description of these menu items in
the operating instructions manual "Indicating and adjustment module".
8) Sensor-specific basic adjustment.
9) Special parameters are parameters which are set customer-specifically on
the service level with the adjustment software PACTware.
Reset
Optional settings
42 VEGABAR 61 • Profibus PA
6 Set up with the indicating and adjustment module PLICSCOM
28251
-EN
-081209